Cheat Sheet

Subharmonicon Tallent Edition

Settings Mode on one page. The New Features Guide explains what each setting does.

Settings Mode

1Enter
PLAYUNLITSEQ 1 ASSIGNOSC 1SUB 1SUB 2HOLD FOR ONE SECOND

Stop the sequencers, then hold both buttons for one second.

2Select a setting
RHYTHM 1SEQ 1SEQ 2MIDIVCFSEQ 1 ASSIGNOSC 1HARMONYSPREADSUB 1GLIDESUB 2VELOCITYDEPTHQUANTIZETUNINGSPANSEQ 2 ASSIGNOSC 2PITCHMODESUB 1RHYTHMTYPESUB 2NOISE

Press its button, which then blinks. The other SEQ ASSIGN buttons are lit if their setting is switched on. Harmony Spread is selected when you arrive.

3Change it
SEQUENCER 1STEP 1STEP 2STEP 3STEP 4VALUEmore LEDs, more of itRESETLOWEREGON / OFFNEXTRAISEPLAYTRIGGERSAVE AND EXIT±5±2COARSE±1FINESEQ OCT

The STEP LEDs of Sequencer 1 show the value.

4Leave
PLAYSAVE AND EXITOR WAIT30 SECONDS

Your settings are saved. PLAY doesn’t start the sequencers.

The Settings

Pitch Mode
SEQ 2 ASSIGNOSC 2NORMALPARAPHONICHARMONYMORPH

EG steps to the next mode. NEXT and RESET step forward and back.

Rhythm Type
SEQ 2 ASSIGNSUB 1STOCKGATE PATTERNS

EG switches. NEXT selects Gate Patterns, RESET selects Stock.

Noise, MIDI VCF
SEQ 2 ASSIGNSUB 2RHYTHM 1SEQ 1ONOFF

SUB 2 selects Noise and SEQ 1 selects MIDI VCF. EG switches. NEXT is on, RESET is off.

Tuning Span
QUANTIZE±2 OCTAVES±1 OCTAVE

The four QUANTIZE LEDs blink. EG switches. NEXT is ±2, RESET is ±1.

Glide
SEQ 1 ASSIGNSUB 1SEQUENCER 1102250100SEQUENCER 220050010002000

Time in milliseconds, on all eight STEP LEDs. NEXT is longer, RESET is shorter. EG switches Glide on and off, and is lit when it’s on.

Harmony Spread, Velocity Depth
SEQ 1 ASSIGNOSC 1SEQ 1 ASSIGNSUB 2ZERO1 TO 3233 TO 6465 TO 9697 TO 127

OSC 1 selects Harmony Spread and SUB 2 selects Velocity Depth. NEXT is more, RESET is less, SEQ OCT is for fine steps. EG switches between zero and your last amount.